Please see the FAA article Ground-Based Navigation - Instrument Landing System (ILS)Ĭhoose the only correct statement about the localizer beam system used by aircraft to find the centerline of a runway during an Instrument Landing System (ILS) approach to an airport. See Wikipedia's article Instrument landing system. The horizontal guidance is provided by ground transmitters of 90 Hz and 150 Hz signals, so that the airplane stays within 10° of the centerline, and must correct if within 35° of the centerline on either side.įor vertical orientation, the same ground system of is simply turned sideways, providing upper 90 Hz and lower 150 Hz signals (Glideslope Signal), so that the airplane stays within the 3° angle.įor more information well-illustrated, please see Boldmethod site, for the article How An ILS Works. "ILS uses two directional radio signals, the localizer (108 to 112 MHz frequency), which provides horizontal guidance, and the glideslope (329.15 to 335 MHz frequency) for vertical." Great explanation on a YouTube video from the FlightInsight channel, titled How ILS Works | Instrument Landing System Explained | IFR Training, 11:40 minutes (set at 1.5 speed to go faster)įrom Wikipedia's article Instrument landing system The Instrument Landing System (ILS), guides airplanes both horizontally and vertically. The question asks for the frequency RANGE. What is the frequency range of the localizer beam system used by aircraft to find the centerline of a runway during an Instrument Landing System (ILS) approach to an airport?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |